Mechanical Engg.

Mechanical Engg.

Faculty Publication

DEPARTMENT OF MECHANICAL ENGINEERING

Sl.NOFaculty NameTopicDetails
86A Lakshumu Naidu, Dr.D. Nageswara RaoProduction and Characterization of Nanocomposite Materials from layered silicate clay.Journal of Materials Processing Technology, ELSEVER [Under Pre Review].
85A. Lakshumu Naidu, Dr.D. Nageswara RaoStudies on Characterization and Mechanical Behavior of Natural Clay.International Journal of Multidisciplinary and Current Research, IJMCR ISSN: 2321-3124, July-August-2013.
84Dr. Biswajit NayakDynamic stability of a rotating sandwich beam with magnetorheological elastomer core.European Journal of Mechanics A/Solids.
83Dr. Biswajit NayakMulti-frequency excitation of magnetorheological elastomer-based sandwich beam with conductive skins.International Journal of Non-Linear Mechanics.
82Dr. Biswajit NayakDynamic analysis of magnetorheological elastomer-based sandwich beam with conductive skins under various boundary conditions.Journal of Sound and Vibration.
81Dr. Biswajit NayakFabrication and Characterization of Magnetorheological Elastomer with Carbon Black.Journal of Intelligent Material Systems and Structures.
80Dr. Biswajit NayakVibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using FEM.Proceedings of the Institution of Mechanical Engineerings, Part C: Journal of Mechanical Engineering Science.
79Dr. Biswajit NayakDynamic stability of magnetorheological elastomer based adaptive sandwich beam with conductive skins using FEM and the harmonic balance method.International Journal of Mechanical Sciences.
78Prof. Dillip Kumar MohantaMetal Inert Gas (Mig) Welding Parameters Optimization.International Journal of Multidisciplinary and Current Research (IJMCR) vol 2 may-june 2014.
77Prof. Mahendra Kumar RathExergy and Energy analysis of Diesel engine using Karanja methyl ester under varying compression ratio.International Journal of Engineering Vol-27.
76Prof. Mahendra Kumar RathThermodynamic analysis of compression ignition engine using neat Karanja oil under varying compression ratio.International Journal of Ambient Energy.
75Prof. Mahendra Kumar RathPerformance analysis of karanja and kusum oils as alternative bio-diesel fuel in diesel engine.Int J Agric & Biol EngVol. 4.
74Dr. Ramesh Chandra MohantyDamping in Layered and Jointed Riveted Structures with Equal Thickness.Proceedings of the Institution of Mechanical Engineers: Part C, Journal of Mechanical Engineering Science.
73Dr. Ramesh Chandra MohantyInvestigation into the Dynamics of Layered and Jointed Cantilevered Beams.Proceedings of the Institution of Mechanical Engineers: Part C, Journal of Mechanical Engineering Science.
72Dr. Ramesh Chandra MohantyEffect of thickness ratio on the slip damping of jointed aluminium cantilever beams.International Journal of Design Engineering (IJDE), Inderscience, Vol. 4.
71Dr. Ramesh Chandra MohantyDetermination of slip damping in jointed riveted beams by finite element approach.Australian Journal of Mechanical Engineers (AJME), Vol. 9, No. 1, pp. 59-69, 2011.
70Dr. Ramesh Chandra MohantyEffect of Micro-slip on the Damping Capacity of Jointed Riveted Structures with Unequal Thickness.Journal of Vibration and Control (JVC), Vol. 17, No. 2, pp. 235-244, Feb. 2011.
69Dr. Ramesh Chandra MohantyFinite element analysis of slip damping in riveted built-up beams.International Journal of Structural Engineering (IJSE), Vol. 3, No. 4, pp. 250-266, 2012.
68Dr. Ramesh Chandra MohantyDamping Improvement in Layered and Jointed Beams by Finite Element Analysis.Advanced Materials Research (AMR), Vol. 505. pp 501-505, 2012.
67Dr. Ramesh Chandra MohantyBiogas as Alternate Fuel in Diesel Engines: A Literature Review.IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 9, Issue 1, pp. 23-28, Sept. 2013.
66Dr. Ramesh Chandra MohantyA Study on Application of Biogas as Fuel in Compression Ignition Engines.International Journal of Innovations in Engineering and Technology (IJIET), Vol. 3, Issue 1, pp. 239-245, Oct. 2013.
65Dr. Ramesh Chandra MohantyBiogas Production from Kitchen Wastes: A Source of Renewable Energy.International Journal of Innovative Research & Studies (IJIRS), Vol. 2, Issue 11, pp. 42-50, Nov. 2013.
64Dr. Ramesh Chandra MohantyAnaerobic Digestion of Kitchen Wastes – Biogas Production and Pretreatment of Wastes: A Review.International Journal of Scientific and Research Publications (IJSRP), Vol. 3, Issue 11, pp. 1-6, Nov. 2013.
63Dr. Ramesh Chandra MohantyAnaerobic Digestion of Kitchen Wastes: A study on Biogas Production and Upgradation through Purification.International Journal of Innovative Research & Studies (IJIRS), Vol. 2, Issue 12, pp. 570-587, Dec. 2013.
62Dr. Ramesh Chandra MohantyAnaerobic Digestion of Kitchen Wastes: Biogas Production, Purification and Application in I.C. Engines.International Journal of Latest Trends in Engineering and Technology (IJLTET), Vol. 3.
61Dr. Ramesh Chandra MohantyExperimental Investigation of Karanja Oil as a Fuel for Diesel Engine using Shell and Tube Heat exchanger.World Academy of Science, Engineering and Technology, International Science Index 85, International Journal of Chemical, Materials Science and engineering (IJCMSE), Vol. 8, No. 1, pp. 91-98, Jan. 2014.
60Dr. Ramesh Chandra MohantyEffects of Compression Ratio on Performance of a Single Cylinder 4- Stroke Compression Ignition Engine using Blends of Karanja Oil Methyl Ester with Diesel in Dual Fuel Mode.International Journal of Engineering Sciences and Research Technology (IJESRT), Vol. 3.
59Dr. Ramesh Chandra MohantyStudy on Improvement of Damping in Jointed Cantilever Beams using FEM .International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol. 3.
58Prof. Chiranjibi Mohanty & Prof. Babuli Kumar JenaOptimization of Aluminium Die Casting Process Using Artificial Neural Network.International Journal of Emerging Technology and Advanced Engineering 4(1) (2014).
57Prof. Mr. Dillip Kumar Mohanta/ Prof. Saumya Kanta SethiEffectiveness of Multi-Layer Coated Tool In Turning Of Aisi 430f Steel.International Journal of Research in Engineering and Technology 3 (2014).
56Prof. Biswojyoti PaniCharacterization of Mechanical Properties of Iron-Mud Filled Glass Fiber Reinforced Epoxy Composites.International Journal of Mechanical Engineering and Materials Sciences 4(2) July-December 2011.
55Prof. (Dr.) A. M. MohantyPortable High Speed Consumable guide welding.National Welding Seminar, Bangalore, India.
54Prof. (Dr.) A. M. MohantyHot wire techniques.Research Bulletin/WRI, BHEL.
53Prof. (Dr.) A. M. MohantyContributions to the discussion of Oxygen content in the submerged arc weld metal.IIW: DOC: XII-A-178-79.
52Prof. (Dr.) A. M. MohantyInvestigation on quasi narrow gap submerged arc welding.Proceedings of International Welding Conference at Osaka, Japan.
51Prof. (Dr.) A. M. MohantySelection of hot wire submerged arc welding parameters.IIW, National Meet, Cochin, India.
50Prof. (Dr.) A. M. MohantyWelding Techniques for Pressure Vessels.Research Bulletin, /WRI, BHEL.
49Prof. (Dr.) A. M. MohantyEvaluation of increased deposition in hot wire submerged arc welding with chosen parameters for pipes up to 40mm thickness.IIW:DOC:XII-A-15-81.
48Prof. (Dr.) A. M. MohantyApproaches to one side welding of Deck Plate Joints with varying root Gaps. National welding Seminar.Cochin, India .
47Prof. (Dr.) A. M. MohantyA study of manganese reaction and Oxygen content in submerged arc weldment. National IIW seminar.Calcutta, India.
46Prof. (Dr.) A. M. MohantyManganese transfer and oxygen.IIW: DOC: XII-A-1096-87. SOFIA
45Prof. (Dr.) A. M. MohantyMechanical and Wear Properties of Carburized Low Carbon Steel SamplesInternational Journal of Multidisciplinary and current research 2 (2014)
44Prof.Mir Sadat AliBio – gas as an alternative fuel for IC enginesPresented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
43Mr.Arun Manohar  Gurram
Mr.D.Raghuveer
Dr.P.S.V.Ramanarao
Solar Powered Wheel Chair: Mobility For Physically Challenged published in International Journal of Current  Engineering  and Technology, Vol.2,No.1 (March- 2012)
42Mr.Arun Manohar Gurram
Mr.D.Raghuveer
An Article on Solar Powered Wheel Chair published in a National Magazine ” Energy Next” November Issue 2012
41Mr. A.Lakshumu Naidu
Mr.B.Sudarshan
Study On Mechanical Behavior Of Groundnut Shell Fiber Reinforced Polymer Metal Matrix CompositesPublished in International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 2, February- 2013 
40Mr.A. Lakshumu Naidu
Mr.D. Raghuveer
Mr.P.Suman
Studies on Characterization and Mechanical Behavior of Banana peel Reinforced Epoxy  Composites  Published in International Journal of Scientific & Engineering Research, Volume 4, Issue 6, June 2013
39Dr.D.SreeramuluAutomatic feature recognition using IGES file in prismatic partsPresented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
38Mr.B.SudarshanModular Manufacturing for Quality and Product Development in IndustriesPresented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
37Mr.A.L.NaiduStudies on characterization and mechanical behavior of layered silicate clayPresented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
36Mr.M.VenkateshImportance of blending karanja oil with methanol & its utilization in a diesel engine.Presented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
35Mr.P.V.N.R. Yagneswar A study of active noise control in air-craftsPresented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
34Mr. Sukanta NayakDYNAMICS OF LIQUID DROPLET ON FLAT PLATE IN SHEAR FLOW WITH ADIABATIC CONDITIONSpublished in the Proceedings of 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference held in IIT Kharagpur, India, December 28-31, 2013
33Mr. P.SsumanA New Methodology to Extract Machining Features From Prismatic PartsPresented a paper in  ICAET- 2014 ( international conference in engineering and technology -2014 ) in singapore
32Mr.Mir Sadat AliModelling the Effect of Cryo-treatment, preheating and SMAW process parameters on Weldment characteristics by ANN.European Journal of Scientific research (in press).
31Mr.Mir Sadat AliA Comparative study of Engine performance by using different Bio Fuels.European Journal of Scientific research, Vol 21, 2008
30Mr.Mir Sadat AliAffect of different Input parameterson weldment characteristics in Tungsten inert gas welding.American Journal of Scientific research, Vol.12, Nov 2010.
29Mr.Mir Sadat Ali Dr.P.S.V.RamanaRaoStudy of Mechanical properties in a weld bead of dissimilar metals.International Journal of Engineering Science and Technology, vol3 No:52011.
28Dr.D.SreeramuluGeneration of optimum sequence of operations using ant colony algorithmInternational Journal of Advanced Operations Management 2012
27Dr.D.SreeramuluIdentification of Patterns in Genetic Algorithm Based Solutions for Optimization of Proces Planning Problems Using a Data Mining ToolInternational Journal of Applied Management and Technology Volume 10, No. 1, 2012, pp. 16-33.
26Dr.D.SreeramuluA New Methodology for Recognizing Features in Rotational Parts Using STEP Data ExchangeInternational Journal of Engineering, Science and Technology Vol. 3, No. 6, 2011, pp. 102-115.
25Dr.D.SreeramuluA New Algorithm for Recognizing Hole Features from STEP FileInternational Journal of Applied Management and Technology Volume 9, No. 2, Nov. 2010
24Dr.D.SreeramuluIntegration of Feature Recognition and Process Planning Using VRML and Petri NetsInternational Journal of Manufacturing Science and Production Vol.10, No.2, 2009, pp.75-90.
23Dr.D.SreeramuluA New Methodology for Recognition of Milling features from STEP FileInternational Journal of Applied Management and Technology, Volume 6, No. 4, Nov. 2008, pp.172-190.
22Dr.D.SreeramuluMachining Feature Recognition and Process Plan Generation for Prismatic PartsInternational Journal of Scientific Computing, Vol.2, No.2, 2008, pp.129-143.
21Dr.D.SreeramuluRecognition of Machining Features and Optimum Process Plan Generation using Genetic AlgorithmsInternational Journal of Manufacturing Science and Production Vol.9, No.3-4, 2008, pp.145-159.
20Dr.D. Nageswara RaoPerformance profiling of boric acid as lubricant in machining.Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.30 (3) (2008).
19Dr.D. Nageswara RaoSurface model and tool wear prediction model for solid lubricant assisted turning.Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology, Vol.222 (5) (2008).
18Dr.D. Nageswara RaoPerformance evaluation of solid lubricants in terms of machining parameters in turning.International Journal of Machine Tools and Manufacture, Vol.48 (10) (2008), 1131-1137.
17Dr.D. Nageswara RaoSurface model and tool wear prediction model for solid lubricant assisted turning.Proceedings of Institute of Mechanical Engineers part-J: Journal of Engineering Tribology, Vol.222 (5), 2008
16Dr.D. Nageswara RaoEstimation of Cavitation Pressure to Disperse Nano Reinforcements in Metal Matrix Composites.In International journal IJNSTEEE (International Journal of Nanosystems, Electrical and Electronics Engg), Vol.1, Issue.1, June 2008, PP. 57-63.
15Dr.D. Nageswara RaoExperimental analysis of sisal nanofluids in a shell coil heat exchanger.International Journal of Nanosystems Vol.1, 2008, PP.85-88.
14Dr.D. Nageswara RaoPreparation and characterization of biodegradable nanoparticles.International Journal of Nanosystems, Vol.1, 2008, pp1-4.
13Dr.D. Nageswara RaoMathematical Modeling of the Influence of Emulsifier Content on Performance of Cutting Fluids.Journal of the Brazilian Society of Mechanical Sciences and Engineering Apr./June 2008, vol.30, no.2, 139-144.
12Dr.D. Nageswara RaoPredictive modeling of Surface roughness and tool wear in solid lubricant assisted turning of AISI 1040 steel.Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol. 223.
11Dr.D. Nageswara RaoExperimental Investigations on the Influence of Emulsifier Content in Cutting Fluids on Machined Surface.Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol. 223 (2), 2009, 195-201.
10Dr.D. Nageswara Rao10. Applicability of Cutting Fluids with Nano Particle Inclusion as Coolants in Machining, Proceedings of the Institution of Mechanical Engineers.Part J, Journal of Engineering Tribology, Vol. 223 (2), 2009, 221-225.
9Dr.D. Nageswara Rao9. Influence of emulsifier content in cutting fluids on cutting forces, cutting temperatures, tool wear and surface roughness.Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol. 223, (2), 2009, 203-209.
8Dr.D. Nageswara RaoThe influence of solid lubricant particle size on machining parameters in turning.International Journal of Machine Tools & Manufacture 48 (2008) 107 to 111
7Dr.D. Nageswara RaoAn Approach to feature-based three dimensional modeling and similarity assessment of turned components.IMechE Vol.221 Part B:J.Engineering Manufacture, 2007.
6Dr.D. Nageswara RaoInfluence of Emulsifier Content on Properties and Durability of Cutting Fluids.Journal of the Brazilian Society of Mechanical Sciences and Engineering, 29 (4), 396-400, 2007.
5Dr.D. Nageswara RaoEffect of emulsifier content on microbial contamination of cutting fluids.Int. J. Machining and Machinability of Materials, Vol. 2, Nos. 3/4, 2007 pp 469-477.
4Dr.D. Nageswara RaoInfluence of Emulsifier content on cutting fluid properties.Proceedings of the I MECH E Part B Journal of Engineering Manufacturing,Vol.220, pp 1803-1806, 2006.
3Dr.D. Nageswara RaoOnline Prediction of Diffusion wear on the flank through tool tip temperature in turning using artificial neural networks.Proceedings of the I MECH E Part B Journal of Engineering Manufacturing,Vol.220,pp 2069-2076, 2006.
2Dr.D. Nageswara RaoIntegration of CAD/CAM/CAE In Product Development System Using Step/Xml.Concurrent Engineering: Research and Applications, Vol-14,no-2 June-2006, pp 121-128.
1Dr.D. Nageswara RaoAutomatic Modular Fixture Generation in Computer-Aided Process Planning Systems.Proceedings of the I MECH E Part C Journal of Mechanical Engineering,Vol.219,pp 1147-1152, 2005.

Admission Inquiry




CUEE Apply